Greenhouses have become important tools in plant cultivation. They provide much needed growing rooms for places which are not very conducive for the development of certain plants. They allow the cultivation of plants in places which could grow these plants normally.
There are many factors which can affect the development of plants inside a greenhouse. The proper balance of air circulation, ventilation, humidity, shading and heating will provide the plants with an optimum environment.
Misting
Other factors will such as ventilation and shading, are important for prevention of overheating in the greenhouse. However, proper misting or the control of humidity is the main factor which maintains a comfortable environment for the cultivation of plants. Evaporation uses up heat when it turns water from liquid into a gas. When the venting process is done, much needed moisture is lost from the greenhouse because it escapes into the air. Misting is one of the ways to replace the lost moisture inside the greenhouse.
The amount of moisture which is needed to be maintained by the greenhouse is dependent on several factors such as the amount of shading and ventilation that is provided, the status of the local climate and the fluctuations in the daily weather. The rule of thumb is that for each 10 square-ft of area, there must be 1-2 gallons/hour of moisture. A misting system will effectively distribute moisture evenly to all the parts of the greenhouse. A good misting system can disperse water in a fine mist, this will prevent the plants from being soaked.
Misting systems reduce temperatures by as much as twenty-five degrees F which is about 14 degrees Celsius.
Here are some facts about misting systems
-Misting systems can be used to disperse water in an ultra fine mist or a very coarse spray. The size of the droplets can depend on the nozzle type, the spacing of the nozzle and the operating pressure.
-Misting systems are used for many different kinds of applications aside from its normal greenhouse chores. They can be used from dust suppression, controlling static electricity control and concrete curing.
-Misting systems utilize pumps which are designed for intermittent or continuous duty. Intermittent pumps are designed to sprinkle water for five minutes and rest for a minute in between misting.
-Misting systems now come with electronic timers which can be programmed to mist 1-14 times a day with each misting ranging from 1 minute to 24 minutes. Other systems can be programmed to mist in shorter durations but more often.
-Nozzles are made from brass or plastic materials. The brass nozzles can be easily affected by minerals that abound in the water supply. The plastic nozzles can tolerate these minerals and can actually repel lime and other deposits.
-The amount of water which is needed to maximize the efficiency of the misting system can be calculated by multiplying the rate of the nozzle flow per minute by the number of nozzles in the system and the result will then be multiplied again by the minutes that the misting system will be in operation each day. This result will be a good estimate of how much water is needed by the system.
-Most misting systems today offer pumps which are almost noise-free. They will not affect the plants and especially the people near the greenhouse.
-Misting systems can be supplemented by an evaporative cooler. They work very well in dry climates (where humidity is below 50%). The air is cooled by around 10-20 degrees by the water which is evaporated because they are drawn through the cooler and then into the greenhouse. Too much humidity can be a problem and this is why people should water the plant only when they need it.
-The use of tools which can measure humidity can also be very helpful for greenhouse enthusiasts.
There are other factors that need to be considered in greenhouse plant cultivation. Misting is just one of them. Misting provides the plants with much needed cooling for the plants.
There are many tools out there that are available for greenhouse plant cultivations which can immensely increase the quality of their greenhouses especially in terms of misting. A cultivator just needs to find out what kind of misting system should be employed for his plants.
When buying a particular product, people are always concerned with the name of the manufacturer. This is because most people tend to think that the quality of the product depends on the kind of manufacturer. In fact, in a certain survey, 6 out of 10 consumers say that they would rather buy a product whose manufacturer is already recognized.
For this reason, experts contend that it would be better to consider the manufacturers first before buying a product.
This is also applicable when buying greenhouses. In today’s modern world, most greenhouses are readily made available in the market. In fact, most of the greenhouses can be purchased in kits, while others still opt for the manually constructed designs.
Greenhouses are the innovative forms of gardening today. Confined in “enclosed structural designs” that are usually made from glass or plastics, greenhouses are believed to offer more than what the outside environment can give to the plants. In this kind of arrangement, light and heat are regulated, thus, providing the right amount in conformity to the particular needs of every plant classification.
Greenhouses can be acquired in assembled form, as “do-it-yourself kits,” or in specially made models. Most of these types of greenhouses differ upon the kinds of “structural beams” and the kind of windowpanes that go with it.
For this reason, it is highly significant for consumers or would-be greenhouse grower to consider the greenhouse manufacturer to ensure the quality of the materials that are used to construct the “hothouse.”
Here is a list of some tips that you must know when contemplating on a greenhouse manufacturer:
1. Do your homework
Nothing comes close in getting a good buy than knowing the kind of situation that you are in. This means that it is important for a consumer to have a handful of knowledge about the product that he is about to buy. This will enable him to confidently identify the things that need to be evaluated first.
Take into considerations the greenhouse manufacturers. It would be better for every consumer to learn about the different greenhouse manufactures in their area. Ask some people, especially those who are already engage into greenhouse businesses, on the ideal greenhouse manufacturer that can provide the best products.
2. Know the manufacturer
If you happen to see a good-enough kind of greenhouse, it would be better to check on its manufacturer. Keep in mind that buying a remarkable product does not always guarantee its excellence. Sometimes people just have to check on its manufacturer to certify its quality.
3. Certifications
When choosing a greenhouse manufacturer, it would be better to check if it is affiliated to a well-known association.
Today, most of the highly acclaimed greenhouse manufacturers are members of The National Greenhouse Manufacturers Association or the NGMA. This is a certified “trade organization” built specially for the greenhouse manufacturers as well as the trader or contractors of greenhouses and its parts.
If you will buy your greenhouse from a greenhouse manufacturer that is affiliated with the NGMA, you can be sure that you will be dealing with an expert. This is because NGMA only recognize those greenhouse manufacturers that are highly knowledgeable and qualified greenhouse manufacturers in the business.
So if you are still looking for a good greenhouse manufacturer, try to contact the NGMA for further information. They have a long list of qualified manufacturers that could provide you with the best greenhouses.
4. Shop around
Grabbing the first greenhouse manufacturer that comes your way is a big no-no, even if its manufacturer is highly recognized in the business. It is still better to shop around for more. In this way, you get to compare prices of the greenhouse or its parts among the qualified greenhouse manufactures that you were able to find.
Keep in mind that getting the best buy is not always dependent on the expertise of the manufacturer. The gratification is always double when the product is bought at a good price.
5. Go online
If there are good enough greenhouse manufacturers in the industry, there are also good enough manufacturers online. The best thing about choosing greenhouse manufacturers online is that you get to evaluate the business without difficulty. Best of all, choosing greenhouse manufacturers online is easier because of the reviews provided by the consumers themselves.
Indeed, choosing the perfect greenhouse manufacturer that will work best for you can be very tedious, but keep in mind that its results offers great advantages like no other.
This website uses cookies that are necessary to its functioning and required to achieve the purposes illustrated in the privacy policy. By accepting this OR scrolling this page OR continuing to browse, you agree to our Privacy Policy