Wind turbines are used for several reasons but the main reason is to generate energy from the wind. This may sound difficult but it is possible. You experience energy from the wind whenever someone runs past you quickly. A second after they pass you can feel the wind from them going by. This wind that you feel if produced in a great amount can be converted into energy. You may have seen the tall turbines standing in the fields when you drive by. There is the older classic model windmill that helped to crush grain when the windmill blades would turn, it would turn a mechanism inside which was attached to a device that would crush grain for flour. There are several different locations that are perfect for the wind power and depending on where they are as to how much energy they produce.
OffShore Turbines can be placed offshore in order to produce energy from wind in the air and from the water. They don't bother the view as much when they are out on the water and the noise that they make cannot be heard on land. The average wind speed is higher on the water because the water has less surface roughness and can use every part of energy from the wind. There are several different locations today that you might see wind turbines offshore and there are more building in the future. The one main complaint with people and turbines is the noise they make. It is constant and annoying to some. The other complaint is that they are tall and not pleasant to look at.
While all of these are true the main reason for wind turbines is to find an alternative to using fossil fuels and other non-renewable resources to produce our power. When a tower is built offshore it may cost more money in the long run because the towers need to be higher so there will be no restrictions. Turbines access power through undersea cable which may use high voltage direct current. The sea salt may also cut down on the length of time these turbines stay in shape.
Near Shore These turbines can be seen but not heard. They are on water so they can produce enough energy compared to being totally on the land. Because the sea shore lines are considered to be very windy due to the tides coming in and the wind on the water, it becomes the perfect location for a turbine. There are issues and concerns with how wildlife is using these towers and zones for their nesting and habitats. There is another concern that the shoreline wind farms are not in the best interests of those who wish to come to the shore line to visit. It becomes a sight to see and hear the generation of power through these wind mills. The size of the towers can be minimal but this causes controversy as well because the smaller the tower the lesser amount of energy to produce.
Off shore and near shore are the choices we have. There are advantages and disadvantages to each one. We have to weigh the results with the problems to see which way may be best for everyone.
If you have ever seen a field with several mirrors pointing toward the sun you may be looking at a solar power system. These systems work to concentrate the sunlight to one area and use the heat to heat up the liquid that flows along the pipes. This system is called Parabolic-trough system. This type of system heats oil that is flowing through the pipe. The oil is hot and that is why it is used to boil water to power a steam generator which in turns powers electricity.
The reason that this system works so well is because the U-shaped mirrors attracts and collects the suns heat which is then transferred onto the receiver. The receiver absorbs the heat and transfers into fluid which helps to power the engine. The heat causes the fluid to swell up against the piston and that produces mechanical power. This type of power can be used to run things like generators or even an alternator that will produce electricity. This system works great when because it uses molten salt that flows through the receiver. When the salt heats up it can generate electricity through the steam generator. The salt holds in the heat for several days before it has to be converted into electricity. Because this system uses so many panels it is mainly used for industrial solar power where acres of land can be donated to the Parabolic Trough. There can be enough power in the network that can create energy for several days or more. Because this system is so large that it allows the heat that it saves to be transferred days later.
Through this project and other solar power projects we can understand fully how solar power works. When we see how much solar power is conserved using these U shaped mirrors we can also understand how much energy is lost. Using concentrating solar power systems are beneficial to the businesses that use them because they won't have so much time down when the power fails. Machinery is their only major concern and as long as their machines are taken care of there should be no problems. Industrial type of solar power can attract and trap a lot of heat from the sun during the day, especially using mirrors that will reflect the sunlight. It also helps to have this type of solar power out in an open field free of trees and vegetation that may grow around and at some point crowd the solar light out.
Scientist are continuously studying this theory as businesses use it to power their machinery. Steam power was what was used from the beginning with solar power and is still what most systems depend on to service their production needs. In the future, fields may eventually be full of mirrors that somewhat point up to the sky in hopes of generating enough sunlight to heat the world. Until then we will use the traditional methods of heating water, heating our homes and powering our electricity.
This website uses cookies that are necessary to its functioning and required to achieve the purposes illustrated in the privacy policy. By accepting this OR scrolling this page OR continuing to browse, you agree to our Privacy Policy